|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number:ENN1421B PNP/NPN Epitaxial Planar Silicon Transistors 2SA1338/2SC3392 High-Speed Switching Applications Features * Adoption of FBET process. * High breakdown voltage : VCEO=(-)50V. * Large current capacitiy and high fT. * Ultrasmall-sized package permitting sets to be smallsized, slim. Package Dimensions unit:mm 2018B [2SA1338/2SC3392] 0.5 0.4 3 0.16 0 to 0.1 1 0.95 0.95 2 1.9 2.9 0.5 1.5 2.5 ( ) : 2SA1338 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions 1 : Base 2 : Emitter 3 : Collector SANYO : CP 0.8 1.1 Ratings (-)60 (-)50 (-)5 (-)500 (-)800 200 150 -55 to +150 Unit V V V mA mA mW C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO hFE VCB=(-)40V, IE=0 VEB=(-)4V, IC=0 VCE=(-)5V, IC=(-)10mA 100* Conditions Ratings min typ max (-)0.1 (-)0.1 560* Unit A A * : The 2SA1338/2SC3392 are classified by 10mA hFE as follows : 2SA1338 2SC3392 Rank hF E 4 100 to 200 5 140 to 280 6 200 to 400 7 280 to 560 Continued on next page. Note : 2SA1338 Marking : AL, 2SC3392 Marking : AY hFE rank : 4, 5, 6, 7 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 83002TN (KT)/71598HA (KT)/3197KI/1114KI, MT No.1421-1/5 2SA1338/2SC3392 Continued from preceding page. Parameter Gain-Bandwidth Product Common Base Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol fT Cob VCE(sat) VBE(sat) Conditions VCE=(-)10V, IC=(-)50mA VCB=(-)10V, f=1MHz IC=(-)100mA, IB=(-)10mA IC=(-)100mA, IB=(-)10mA (-)60 (-)50 (-)5 70(70) VCC=20V IC=10IB1=-10IB2=100mA 400 (400) 70(50) Ratings min typ 300 (200) 3.7 (5.6) 0.1 (0.15) 0.8 max Unit MHz pF 0.3 (0.4) 1.2 V V V V V ns ns ns V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)100A, RBE= V(BR)EBO ton tstg tf IE=(-)10A, IC=0 Switching Time Test Circuit PW=10s D.C.=1% INPUT VR 50 + 100F --5V + 470F (For PNP, the polarity is reversed.) VCC=20V IB1 RB IB2 RL 200 OUT 700 A 60 0 0 A 2SA1338 A --100 --90 IC -- VCE --7 0 A A 00 00 --5 --4 100 90 IC -- VCE 5 A 00 2SC3392 A 400 300A Collector Current, IC - mA --70 --60 --50 --40 --30 --20 --10 0 0 Collector Current, IC - mA --80 A --300A 80 70 60 50 40 30 20 10 --600 --200A 200A --100A 100A IB=0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE - V --1.0 ITR05058 0 IB=0 0 0.2 0.4 0.6 0.8 1.0 ITR05059 Collector-to-Emitter Voltage, VCE - V 20 18 --20 --18 IC -- VCE A --60 50A -2SA1338 A --40 IC -- VCE 60A 50A 40A 30A 2SC3392 Collector Current, IC - mA --14 --12 --10 --8 --6 --4 --2 0 0 A --30 --20A Collector Current, IC - mA --16 16 14 12 10 8 6 4 2 --10A 20A 10A IB=0 --5 --10 --15 --20 --25 --30 --35 --40 Collector-to-Emitter Voltage, VCE - V ITR05060 0 IB=0 0 5 10 15 20 25 30 35 40 Collector-to-Emitter Voltage, VCE - V ITR05061 No.1421-2/5 2SA1338/2SC3392 --120 --100 IC -- VBE 2SA1338 VCE=--5V 120 IC -- VBE 2SC3392 VCE=5V 100 Collector Current, IC - mA --25C Ta=75C --60 --40 --20 0 0 60 40 20 --0.2 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE - V --1.0 ITR05062 0 0 0.2 0.4 Ta=75C 0.6 --25C 0.8 25C 25C --80 Collector Current, IC - mA 80 1.0 ITR05063 Base-to-Emitter Voltage, VBE - V 2 2 hFE -- IC 2SA1338 VCE=--5V Ta=75C 25C hFE -- IC 2SC3392 VCE=5V 1000 7 1000 7 DC Current Gain, hFE 5 3 2 DC Current Gain, hFE 5 3 2 Ta=75C --25C 25C --25C 100 7 5 3 100 7 5 3 --1.0 1000 2 2 3 57 --10 2 3 5 7 --100 2 Collector Current, IC - mA 3 5 7--1000 ITR05064 2 1.0 2 3 5 7 10 2 3 Collector Current, IC - mA 5 7 100 2 3 5 7 1000 ITR05065 fT -- IC 2SA1338 VCE=--10V 1000 fT -- IC 2SC3392 VCE=10V Gain-Bandwidth Product, fT - MHz Gain-Bandwidth Product, fT - MHz 7 5 3 2 7 5 3 2 100 7 5 3 2 100 7 5 3 2 10 --1.0 3 2 2 3 57 --10 2 3 5 7 --100 2 Collector Current, IC - mA 3 5 7--1000 ITR05066 10 1.0 2 3 5 Collector Current, IC - mA 7 10 2 3 5 7 100 2 3 5 7 1000 ITR05067 Cob -- VCB 2SA1338 f=1MHz 3 2 Cob -- VCB 2SC3392 f=1MHz Output Capacitance, Cob - pF --10 7 5 Output Capacitance, Cob - pF 7 7 --10 2 3 5 2 Collector-to-Base Voltage, VCB -- V 3 5 10 7 5 3 2 3 2 --1.0 --1.0 1.0 7 1.0 2 3 5 7 10 2 3 5 ITR05068 Collector-to-Base Voltage, VCB -- V ITR05069 No.1421-3/5 2SA1338/2SC3392 --10 5 VCE(sat) -- IC 2SA1338 IC / IB=10 10 5 VCE(sat) -- IC 2SC3392 IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE (sat) - V Collector-to-Emitter Saturation Voltage, VCE (sat) - V 5 2 3 3 2 3 2 1.0 5 3 2 0.1 5 3 2 5 2 3 5 2 3 5 2 3 5 1000 ITR05071 --1.0 5 3 2 --0.1 5 3 2 --0.01 --1.0 --10 2 3 5 --100 Collector Current, IC - mA 5 2 3 5 --1000 0.01 1.0 10 100 ITR05070 10 7 Collector Current, IC - mA --10 7 VBE(sat) -- IC 2SA1338 IC / IB=10 VBE(sat) -- IC 2SC3392 IC / IB=10 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 Base-to-Emitter Saturation Voltage, VBE (sat) - V 2 3 5 3 2 3 2 --1.0 7 5 1.0 7 5 3 5 --1.0 --10 2 3 5 --100 Collector Current, IC - mA 5 2 3 5 --1000 3 5 1.0 2 3 5 10 2 3 5 100 2 3 ITR05072 2 1.0 7 Collector Current, IC - mA 5 1000 ITR05073 2 SW Time -- IC 2SA1338 VCC=20V IC=10IB1=--10IB2 SW Time -- IC 2SC3392 VCC=20V IC=10IB1=--10IB2 1.0 7 Switching Time, - s 5 3 2 0.1 7 5 3 2 Switching Time, - s tstg 5 3 2 0.1 7 5 3 tstg tr tf tf td tr 10 2 3 5 7 100 2 3 5 7 td --10 2 2 --100 Collector Current, IC - mA 5 7 3 3 5 7 2 0.01 0.01 7 7 ITR05074 240 Collector Current, IC - mA ITR05075 ASO 1000 7 5 PC -- Ta 2SA1338 / 2SC3392 3 2 100 7 5 3 2 10 7 5 3 3 10 10 DC ms 0m Collector Dissipation, PC - mW Collector Current, IC - mA ICP=800mA IC =5 00 mA 1m s 200 s 160 op era 120 tio n 80 40 2SA1338 / 2SC3392 (For PNP, minus sign is omitted.) 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Emitter Voltage, VCE - V 7 100 ITR05076 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta - C ITR05077 No.1421-4/5 2SA1338/2SC3392 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2002. Specifications and information herein are subject to change without notice. PS No.1421-5/5 |
Price & Availability of 2SA1338 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |